Features and benefits
- The GN3021DX Thermoformer was developed to meet the demand for thermoformed APET products. It was designed to provide greater APET cutting capacity than the standard Contact-Heat Cut-In-Place GN3021C Thermoformer
- In-mould cutting ensuring consistent and accurate trim
- Servo-driven platen for smooth and energy efficient movement
- Four point toggle systems with oversized roller bearings
- High speed forming system
- Multi-zone contact heating system
- Electric pre-heater
- Microprocessor-based control systems (PLC)
- Photo scanning available for preprinted sheet
- Static eliminator
- Stacking equipment available
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming
Area |
760mm x 530mm (30"
x 21") maximum |
| Depth
of Draw |
125mm (5") maximum |
| Knife
Length (maximum) |
8500mm (335") for APET / 9525mm (375")
for other thermoformable materials
|
| Clamping Force |
100 Ton |
| Sheet
Width |
815mm (32")
maximum |
| Material
Thickness Range |
0.15mm - 1.00mm (0.006"-0.040") |
| Material
Roll Diameter |
711mm (28")
maximum |
| Dry Cycles
per Minute |
25 maximum |
| Main Supply Voltage |
3x400V+N+PE, 50-60Hz (380-415V) / 3x480V+PE, 50-60Hz (440-480V) / 3x220V+PE, 50-60Hz (220-240V) |
| Power
Consumption |
7.5 Kilowatts/hr (Approximate) |
| Air
Pressure |
6.8 bar (100 PSI)
minimum |
| Air
Consumption |
850 Litres/min (42
CFM) |
| Cooling
Water Consumption |
6 Litres/min @ 15° C
- 20° C)
(1.5 gal/min @ 58° F - 68° F) |
| Machine
Dimensions (l x w x h) |
2718mm x 1850mm x
1985mm
(107" x 73 " x 78 ") |
| Machine
Weight |
3636 kg (8016 lbs) |
|
Above specifications
subject to change
  |
THERMOFORMING
MACHINES 
